Electrical and Computer Engr. (ECE)
This course provides an integrated introduction to electrical engineering and computer engineering. It covers the principles of electrical and comoputer engineering including sinusoidal wave forms, electrical measurements, digital circuits, and applications of electrical and computer engineering. 1 credit hours.
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Laboratory activities on electronic circuits, Ohm's law, voltage, current, resistance, and basic text instruments are emphasized. 1 credit hour.
Prerequisite(s): (ECE 131 (may be taken concurrently))
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Use of the C++ language as a problem-solving tool is emphasized, including algorithmn approaches to problem and computer program design for engineers. 3 credit hours.
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Direct current topics covered: current, coltage, resistance, power, energy, series and parallel circuits, combination circuits, Ohm's law, Kirchhoff's rules, inductance, capacitance, and magnetism. 3 credit hours.
Prerequisite(s): (MATH 241 and ECE 111 (may be taken concurrently))
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Practical experiences in the measurement and analysis of alternating current with voltage, impedence, and phaser experiments are studied. 1 credit hour.
Prerequisite(s): (ECE 231 (may be taken concurrently))
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Laboratory experiments on implementation off basic digital logic and hardware, combinational circuits, flip-flops, registers, and sequential circuits. 1 credit hour.
Prerequisite(s): (ECE 235 (may be taken concurrently))
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Continuation of ECE 131 with studies of alternating current cirsuits, impedance concepts, network theorems, transformers, passive filters, and response curves are emphasized. 3 credit hours.
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Overview of digital computer systems. Boolean algebra, number systems, codes, combinational and sequential logic device, programmable logic devices, and study of digitial hardware with emplasis on digital circuits such as A/D and D/A converter, memory circuits. 3 credit hours.
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
High-level, object-oriented lanlguate programming using JAVA is emphoasized. The course includes inheritance and polymorphism, implementing, higing and the creation of JAVA applet for internet usage. 3 credit hours.
Prerequisite(s): ECE 130
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Study of energy storage and conversion, force and emf production, coupled circuit analysis of systems with both electrical and mechanical inputs, applications to electric motors and generators and other electromechanical transducers are emphasized. 3 credit hours.
Prerequisite(s): (ECE 231 and PHYS 251 and PHYS 252 (may be taken concurrently))
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Laboratory experiments on the application, analysis, and measurement of semiconductor devices in amplifier circuits. 1 credit hour.
Prerequisite(s): ECE 331 (may be taken concurrently)
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Laboratory experiments to explore the relationship between hardware and software in microprocessors, input/output operations, and assembly language techniques. 1 credit hour.
Prerequisite(s): (ECE 332 (may be taken concurrently))
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
A series of control system experiments including process control using PID controller experiments, closed loop control systems, and transient response design topics. 1 credit hour.
Prerequisite(s): (ECE 335 (may be taken concurrently))
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Laboratory Experiments utilizing hardware and software in the design of a real-time embedded system. 1 credit hour.
Prerequisite(s): (ECE 339 (may be taken concurrently))
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Learn how to use mathematics to formulate, solve and analyze physical problems which includes systems and series of ordinary differential equations, Fourier analysis, partial differential equations, linear algera, vector calculus, special functions, uncontrained and combinational optimization, and etc. 3 Credit hours.
Prerequisite(s): MATH 251
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Study of th operation and characteristics of semiconductor devices such as introduction to electronic systems. linear circuits, diodes, field effect transistors, amplifiers and nonlinear circuits, and operational amplifiers, and applications are emphasized. 3 credit hours.
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Introduction to microprocessor hardware and software, including:microprocessor principles, organization machine language programming, and input/output functions. 3 Credit hours.
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Software engineering is the study and an applicaiton of engineering to the design, development, and maintenance of software. 3 Credit hours.
Prerequisite(s): ECE 236
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Signals and Systems is an introduction to analog and signal processing. It presents and integrates the basic concepts for both continuous-time and discrete-time signals and systems. 3 credit hours
Prerequisite(s): MATH 242
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Study of feedback control systems with the emphasis on the Linear Servomechanism theory and design principles, Pole-zero analsysis, stability of feedback systems by root locus and real-frequency response methods, design methods of Bode and Nichols, introduction to advanced topics in automatic control theory. 3 Credit hours.
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
This course aims to convey knowledge of circuit design for digital VSL components to state of the of art MOS and BICMOS technologies. Emphasis is on the circuit design, optimization, and layout for use in applications such as micro-procdssors, signal and multimedia processors, memory and periphery .3 credit hours.
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
The fundamental principles of artificial intelligence and expert systems are introduced and their application in varous areas of science and engineering. 3 credit hours.
Prerequisite(s): ECE 332
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
This course introduces the fundamental problems of computer networking, from sending bits over wires to running distributed applications. Some advanced wireless networks will be included such as wireless sensor networks and internet of things. 3 credit hours.
Prerequisite(s): ECE 332
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Prerequisite(s): (ECE 432 (may be taken concurrently))
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Laboratory experiments in data communication devices is emphasized including modems, multiplexers, concentrators, front-end processor, error-checking, simple/duplex transmission, and telecommunications. 1 credit hour.
Prerequisite(s): (ECE 434 (may be taken concurrently))
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
It is an introductory subject on electromagnetism, emphasizing fundamental concepts and applications of Maxwell equations. Topics covered include: polarization, dipole antennas, wireless communications, forces and energy, phase matching, dielectric waveguides and optical fibers, transmission line theory and circuit. 3 credit hours.
Prerequisite(s): ECE 330
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
In this course, students who received “unsatisfactory” grade in ECE 401 will use the method of the Face-to-face study and independent study to fulfill the requirement for the graduation. These requirements give the student an opportunity to master a particular aspect of the discipline in depth.
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Study of communication systems with emphasis on the application of frequency domain and time domain response of linear systems, analog modulation methods including amplitude modulation, frequency modulation and phase modulation, signal and noise modeling using probabilistic descriptions, narrowband. 3 credit hours.
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Analysis and design of transmission lines and matching circuits, Loss in transmission lines, Mode structures in metallic and dielectric waveguides, Microwave resonators and magnetic devices, Smith chart and matching techniques. 3 credit hours.
Prerequisite(s): ECE 430
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Study of data communication devices and software, their functional and operational aspects; including modems, control units, multiplexers, concentrators, front-end processors, and etc. 3 credit hours.
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
The design and implementation of software applications in a networked environment are emphasized. Topics include a broad overview of network technology, the OSI model, socket programming, multithreading, and web programming. 3 credit hours.
Prerequisite(s): ECE 338
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
The fundamental principles of artificial intelligence and expert systems are introduced and their application in various areas of science and engineering. 3 credit hours.
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Application of learned theories/algorithms and available computer technologies to modern image and speech processing problems and emphasized. Characteristics of speech signals, linear predictive coding (LPC) of speech, pitch detection, and LPC speech synthesis, speech recognition, hardware designs for signal process. 3 credit hours.
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
This course is an introduction to power systems engineering. Topics include complex power, phases, balanced three phases, transformers and per-unit system, transmission line, power flow problem, symmetrical faults and power system controls. 3 credit hours.
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
This course addresses information security, ethical and legal practices, and mitigating cyber vulnerabilities. Students will also learn about the cryptography, hardware security, and software security. The content is targeted at ensuring the privacy, reliability, and integrity of information systems. 3 credit hours.
Prerequisite(s): ECE 338
College/School: Col of Science, Engr & Tech
Department: Department of Engineering
Opportunity for seniors to engage in a team project in applied electrical and computer engineering field where integration of knowledge obtained throughout the program is possible. Students are formed into small design groups (typically three students) and assigned a project. In addition to carrying out the design. 4 credit hours.
College/School: Col of Science, Engr & Tech
Department: Department of Engineering